A3D Products Manual
      Frequently Asked QuestionsManual Table of ContentsA3D Requirements

      Hardware Installation

      Installing your A3D product is fairly simple.

      Assassin 3D and Panther

      1. Turn off your computer
      2. Unplug your existing joystick from your computer gameport
      3. Plug your joystick into the Trackball's connector
      4. Plug the Trackball into your computer gameport
      5. Turn on your computer

      Location of the Assassin 3D components is strictly your preference. The most common placement is for the Trackball to be located on the left side of the keyboard and the Joystick to be located on the right side of the keyboard. This Trackball/Joystick placement is due to most premium joysticks being right-handed only. However, if you have an ambidextrous joystick, the A3D product may be placed on the right side for usage by the right hand. That's all there is to the hardware installation. There are, however, a few Potential Problems areas to address.

      PantherXL

      1. Turn off your computer
      2. Unplug your existing joystick from your computer gameport
      3. Plug your PantherXL into your computers gameport
      4. Turn on your computer

      The location of the Panther XL is your choice but we have seen where you can prop the keyboard up against the monitor and the PantherXL in front of the keyboard. This will allow you easy access to the keyboard if you need it and still give you a balanced playing area.

      Frequently Asked QuestionsManual Table of ContentsA3D Requirements

      Home - Gamer's Corner - Support - What's New
      This page was last updated 06/13/04